JoeCustoms.com https://www.joecustoms.com/forums/ |
|
2DARK2C-TEAM SUPERBEAST-4 bikes/riders race ready! https://www.joecustoms.com/forums/viewtopic.php?f=134&t=46503 |
Page 1 of 4 |
Author: | DREMEL [ Thu Mar 15, 2018 12:19 am ] |
Post subject: | Re: 2DARK2C jetbike build thred |
Making 4? You making them all different or the same? I am doing mine all different. I enjoy how much different one can look from the other. They slap together pretty quick. Pretty small builds. I am currently trying to get motivated to look for parts to build riders out of. My Joe room is a half done disaster. |
Author: | pluv [ Thu Mar 15, 2018 12:39 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
Goof off is an acetone. It will melt plastic. |
Author: | DREMEL [ Thu Mar 15, 2018 2:34 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
Acetone (fingernail polish remover) has very minimal if any plastic melting. Infact I am pretty sure when I tried using it with hopes of it melting the plastic that it didnt melt it at all. Goofoff on the other hand is a very strong plastic melter. I tried using it for welding plastics a bit and it did the trick. |
Author: | DREMEL [ Thu Mar 15, 2018 2:46 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
OK so went to test it. Fingernail polish remover does not melt the plastic but at the same time did not do much for taking off the sticker either. Alcohol did a little better but was still lacking. A piece of an orange peel, rubbing the white area on it actually did pretty good. I usually use paint thinner/mineral spirits for sticker removal. |
Author: | Dusty79 [ Thu Mar 15, 2018 6:11 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
Nail polish remover is weakened a bit I believe. The hard stuff is dangerous. https://youtu.be/tkOeqa-y890 |
Author: | 2DARK2C [ Thu Mar 15, 2018 8:47 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
oops! I read goo gone in the main thred, but grabbed goof off from my wifes hobby stuff! glad I procrastinated no hard plan yet Dremel. i'm thinking a team of 2-3 and a couple singles. none will be exactly the same, but the team might be similar. |
Author: | DREMEL [ Fri Mar 16, 2018 1:39 am ] |
Post subject: | Re: 2DARK2C jetbike build thred |
Dusty79 wrote: Nail polish remover is weakened a bit I believe. The hard stuff is dangerous. https://youtu.be/tkOeqa-y890 I may have to look at investing in some straight acetone for welding. |
Author: | DREMEL [ Fri Mar 16, 2018 1:43 am ] |
Post subject: | Re: 2DARK2C jetbike build thred |
2DARK2C wrote: oops! I read goo gone in the main thred, but grabbed goof off from my wifes hobby stuff! glad I procrastinated no hard plan yet Dremel. i'm thinking a team of 2-3 and a couple singles. none will be exactly the same, but the team might be similar. I was thinking about a team but not sure I will get there. I am also considering a double bike. |
Author: | DREMEL [ Wed Mar 21, 2018 12:54 am ] |
Post subject: | Re: 2DARK2C jetbike build thred |
well it became official, I have my first team started. I wanted to make a Dreadnok team but right now it looks like I an going to have at least a Red Shadow team. |
Author: | 2DARK2C [ Wed Mar 21, 2018 6:52 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
cool! my wife picked me up a huge bottle of goo gone! so maybe I can get back to debiking and ramjetting! |
Author: | DREMEL [ Wed Mar 21, 2018 7:11 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
2DARK2C wrote: cool! my wife picked me up a huge bottle of goo gone! so maybe I can get back to debiking and ramjetting! Yeah, come on get on it. I am about to post two more bikes. |
Author: | DREMEL [ Tue Mar 27, 2018 11:18 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
dang save those two solid kickstands. probably hardest part to find for a complete RAM It is fun to see the different approaches. Your approach looks so deliberate. This is how my builds went. Find Rams Find jet pieces. take dremel to Ram and jet piece and figure out exactly how much you need to cut and where by cutting. Start gluing find a wing glue on the wing somewhere go digging through parts and pieces to see if you need to add anything else. start removing any stickers that may still be on. Sand where needed procrastinate about painting. Decide that I can not paint until I have a driver Go sorting through figure parts until something comes together Once figure is put together decide on affiliation of figure and jetbike paint figure and vehicle and add stickers. |
Author: | 2DARK2C [ Tue Mar 27, 2018 11:31 pm ] |
Post subject: | Re: 2DARK2C jetbike build thred |
I have a table full of parts I "found" while waiting on my bikes. trying to get them into a decent configuration . my riders were planned customs anyway I figured this was as good a reason as any to build them. |
Page 1 of 4 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |