Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Thu Mar 28, 2024 4:11 am (All times are UTC - 5 hours [ DST ])




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 22 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 2:41 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Kirkland, WA
Original McCullen mask from Skeletons in the Closet.

I don't want to start from scratch and have never figured out a good base for it. Can anyone think of a part out there that might work as good starting point?

Attachment:
destromask.jpg
destromask.jpg [ 291.25 KiB | Viewed 1363 times ]

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 2:51 pm 
User avatar

Joined: Mon Oct 07, 2013 3:59 pm
Location: MS
my first thought would be an over sized wrist gauntlet. i'll look in my kiss figure fodder.

_________________
The more you run over a dead cat,
the flatter it gets.
-Anonymous


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 4:01 pm 
User avatar
Moderator
Moderator

Joined: Tue Jun 26, 2007 10:19 am
Location: IA
A scalpel mask with some kibble from some boss fight armor?

_________________
TEAM RED LASER 4 Life
bucky, drbindy, Tim 121RVC, alleyviperelite, danielb, DREMEL
harlie, icecreamman, Jogunwarrior, Mysterious Stranger
Oneforceleader, Rambo, ronin, Silent Master, Suburbanator
toy-nutz, Tsunami, Wowboy, pugsley, spin doctor


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 4:58 pm 
User avatar
Foreign Vehicle Driver
Foreign Vehicle Driver

Joined: Tue Jun 26, 2007 10:19 am
Baron Ironblood?

_________________
chad_ghost (->)-(<-)

:ghost: Chad & Matthew's Custom GI Joe Figures :mayor:
emoticons by Sapper

Be transformed at army4One.com


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 5:09 pm 
User avatar

Joined: Mon Oct 07, 2013 3:59 pm
Location: MS
i looked and found some things to cut down fashion and do a whole lot of work. then i picked up a v2? stalker mask. that thing is a few spikes away from perfect.

Image

_________________
The more you run over a dead cat,
the flatter it gets.
-Anonymous


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 5:59 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Kirkland, WA
Huh... You might be right.

Lots of solid ideas here, keep em coming if anyone thinks of more!

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 6:58 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
Don West's Helmet form the Lost in Space toyline. The visor goes up so it might be better than whatever that spiked rebreather thing is supposed to be.

https://www.ebay.com/i/293578307415

Attachment:
west.jpg
west.jpg [ 154.53 KiB | Viewed 1342 times ]

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 7:01 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
Matt Tracker's with some mods could work too, specifically cutting off the top and adding all the spikes.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 7:12 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
If you're willing to do a complete headswap AND make mods. The Thor movie Destroyer is a decent place to start.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Mon Jul 06, 2020 7:42 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Kirkland, WA
These are great!

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Thu Jul 09, 2020 6:56 pm 
User avatar

Joined: Mon Oct 07, 2013 3:59 pm
Location: MS
looking through specs swap shop this jumped out at me.

Image

it might be a good place to start. he said :

"I believe it is actually called thr Iron Cage. It came in 2 different pinatas. Dark Voyager and the giant pinata if I recall correctly.

It os bigger than a head but could probably be trimmed and shaped to make a mask out of."

_________________
The more you run over a dead cat,
the flatter it gets.
-Anonymous


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Thu Jul 09, 2020 7:12 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Kirkland, WA
Interesting, definitely see the potential

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Thu Jul 09, 2020 9:04 pm 
User avatar
Special Limited Edition Co-Host / Membership Has Its Privileges
Special Limited Edition Co-Host / Membership Has Its Privileges

Joined: Mon Nov 19, 2007 3:31 pm
Location: Fort Wayne
I'm seeing a HACKS orc shoulder pad as the top half of the base plate

_________________
Kwinn_Lives wrote:
you have now won more JCAs than anyone in the history of the award.

Mysterious Stranger wrote:
You sir are the definition of a Renaissance Nerd... you do it all so damn well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Thu Jul 09, 2020 10:08 pm 
User avatar
JC Podcaster

Joined: Tue Jun 26, 2007 10:19 am
Location: Clifton, NJ
2DARK2C wrote:
looking through specs swap shop this jumped out at me.

Image

it might be a good place to start. he said :

"I believe it is actually called thr Iron Cage. It came in 2 different pinatas. Dark Voyager and the giant pinata if I recall correctly.

It os bigger than a head but could probably be trimmed and shaped to make a mask out of."



DAMN! I made a lot of typos. That is what happens when I try to return messages quickly in between delivering streets on my route LOL

_________________
Founding Member Of The CSOTC (Customize Something Other Than Clones) Society

Visit me on Facebook!
http://www.facebook.com/profile.php?id=100000474627568

https://www.facebook.com/Spectreverse/

Follow me on Twitter: @The_Spectre_DK


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Any ideas for this mask?
PostPosted: Fri Jul 10, 2020 1:16 am 
User avatar

Joined: Mon Oct 07, 2013 3:59 pm
Location: MS
what's worse i didn't see one typo, the 3 times i read it :)

_________________
The more you run over a dead cat,
the flatter it gets.
-Anonymous


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 22 posts ]  Go to page 1, 2  Next

It is currently Thu Mar 28, 2024 4:11 am (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group