Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Thu Mar 28, 2024 5:29 pm (All times are UTC - 5 hours [ DST ])




Post new topic Reply to topic  [ 38 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Considering Casting Projects
PostPosted: Wed Jul 11, 2012 1:36 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
I'm interested and willing to discuss potential casting projects.

I've done Commissioned castings in 2 ways...mostly depending on the scope of a project.

For simple items where I know pretty exactly how much time and material will cost (Ex: a head) I will most likely just quote a price.

For more complex Commissions I prefer to quote a "set up" cost due upfront, and a Materials fee paid upon delivery. (It's easier to figure out exactly how much material was used after it's been used.)


Examples of some Items I've cast on Commission:

NJCC Hazzard Tank parts:
Image

Flame for NJCC tanks, Jump Flame effect base.
Image

Renegades Guns:
Image
Image

Nano Bat:
Image


I currently have 3 commissions that I'm working on completing....This current work load should be wrapped up by the end of August.

Please PM me to discuss your project.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Last edited by nova on Mon Aug 13, 2012 8:46 pm, edited 1 time in total.

Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Sun Jul 29, 2012 11:17 am 

Joined: Sun Jul 29, 2012 11:13 am
I'm looking for someone to make casting for me of old Kenner Predator figs. I have the originals, I just need someone to make copies. Is that something you'd be able to do? I also need 4 copies of the wide-brimmed Asian hat that comes in one of the Retaliation 3paks, but I don't have that particular part.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Wed Aug 08, 2012 2:15 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
More Examples of Finished Projects.

Image

Image

Image

Begun, the Casting Wars has.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Last edited by nova on Wed Aug 08, 2012 3:43 pm, edited 1 time in total.

Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Wed Aug 08, 2012 3:29 pm 
User avatar
DarkJedi'd

Joined: Tue Jun 26, 2007 10:19 am
Location: The Black Hole of Toydom
Damn, in the last pic, I want that Russian head and multiples of the USS Flagg deck crew head.

_________________
Hero Machine Real Characters: https://tinyurl.com/yyguul9e
Hero Machine Original Characters: https://tinyurl.com/y59j5gmd
Hero Machine Other properties: https://tinyurl.com/y48nnp8u


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue Aug 21, 2012 3:05 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Image

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue Aug 21, 2012 6:15 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
nova wrote:
Image

Dude! Thats Sweeeeeeet! Nice work!

_________________
It is better to live a day as a Lion, then your whole life as a Lamb.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Thu Sep 20, 2012 11:18 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
The Parts pictured in this post are for sale in THIS thread: viewtopic.php?f=21&t=35211

Just a few further examples of my work...colors and parts.


"RockBlock" Hands.
Image

Baby Hope
Image

Night Viper Visors and Monocle.
Image

Alley Viper Visors. (Production visor is for reference only, Not for Sale.)
Image

Zartan Pads.

Image

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue Dec 11, 2012 11:37 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Toxic Water Zartan: Custom Collaboration. Full figure Run limited to 10.
Image

Kevin Watts is currently working on the 1st figure that will be made available to the public. Once the figure has been finished to Kevin's exacting standards it will be auctioned off on eBay.

Sale Details for the rest of the Run, How, Where, When, and Price have not been finalized.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue Dec 11, 2012 11:38 am 
User avatar
General Pittance Contributor
General Pittance Contributor

Joined: Tue Jun 26, 2007 10:19 am
keep us updated


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue Dec 11, 2012 12:26 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
nova wrote:
Sale Details for the rest of the Run, How, Where, When, and Price have not been finalized.
I bet you could auction off all of them one at a time and make more that way.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue Dec 11, 2012 8:20 pm 
User avatar

Joined: Thu Sep 18, 2008 10:35 am
Location: Denver, CO
That Toxic Water Zartan is mesmerizing!


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Sun Apr 21, 2013 3:34 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
I've finished a project up for a friend and the molds still have plenty of life. Let me know if there is any interest in custom cast night raven parts.

Image

Parts I have ready to run:
Raven windscreen
Pod windscreen
Raven spine gun
Raven spine gun shield
Raven jet intake
Raven jet exhaust
Pod intake
Pod exhaust
Pod interior
Pod guns (left & right)
Raven missiles
Raven bombs

Image

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Raven molds ready for casts.
PostPosted: Sun Apr 21, 2013 5:52 am 
User avatar
Donor
Donor

Joined: Mon Jul 26, 2010 3:00 am
Location: AZ
In order of need for me to help give you an idea for any future runs.

1. Raven spine gun shield (M-4165-9: Gun Windscreen(black)) X 3
2. Pod exhaust (M-4175-1:Recon Exhaust (orange)) X 3
3. Raven spine gun (Double Cannon (silver)) X 2
4. Pod guns (left & right) X 3 sets

Now, when it comes to the Raven and pod windscreens, I might be interested in a set of clear and a set of blue for my Sky Patrol Sky Raven - depending on the price and how clear you can get them. If you can do clear, I might just dye them myself like this - http://static.rcgroups.net/forums/attac ... ectrum.jpg

_________________
Beav said, "You are the worst of humanity."


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Tue May 07, 2013 8:00 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
All Look Great.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Considering Casting Projects
PostPosted: Thu Aug 01, 2013 8:17 pm 
User avatar

Joined: Mon Jul 29, 2013 6:19 am
So how can I get a hold of your cast replacement Zartan parts?


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 38 posts ]  Go to page 1, 2, 3  Next

It is currently Thu Mar 28, 2024 5:29 pm (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group